PA2250T
Dual 250 W/CH power amplifier
- Efficient performance for low impedance or distributed systems
- Ideal for sound reinforcement, paging, and life safety
- 250 W per channel for 4 Ω or 70/100 V lines
- Bridged mono out for 540 W into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
Technische Daten
Height | 88mm (3.46") |
Width | 483mm (19.02") |
Depth | 406mm (15.98") |
Technische Daten |
Weight Net | 23.5kg (51.81 lbs) |
Frequency Response (-3 dB) | 65Hz - 40kHz |
Continuous Rated Power (1 kHz, THD 1%) 70v | 270Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v | 250Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v | 250Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 250Watts |
Continuous Rated Power (1 kHz, THD 1%) 2Ω | 270Watts |
Impedance | 4/8Ω (70V/100V) |
Continuous Rated Power (1 kHz, THD 1%) 8Ω | 135Watts |
Crosstalk | < < -75dB |
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 125Watts |
Rated output power (*rated load) THD < 1%, 1kHz | 270/135W (70V/100V-270) |
Total Harmonic Distortion | < 0.1% |
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | 250/125W (70V/100V-250) |
Slew Rate | 18V/µs (70V-41, 100V-61) |
Channels | 2 |
Intermodulation Distortion (SMPTE) | < 0.1% |
DIM 30 | < 0.1% |
Signal-to-Noise Ratio (A-weighted) | 103dB |
Input Impedance (Balanced) | > 20kΩ |
Input Sensitivity | 0 dBu (775mV) (@ rated output power or voltage, 1kHz) |
Number of Channels | 2 |
Network Control (IRIS-Net) | No |
Amplifier Gain | 34.3dB |
Continuous Rated Power (1 kHz, THD 1%) 100v | 270Watts |
Continuous Rated Power (1 kHz, THD 1%) 4Ω | 270Watts |
Where to Buy
Install Sound Partners
* Call for availability
Downloads
Garantie & Kundendienst-Programme
Similar Products