EVF-1122D/64-FG
Premium Arrayable point-source 12” 60°x40° fully-weatherized loudspeaker
- Fully-weatherized fiberglass finish with gland nut and stainless-steel grille
- DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver
- DVX3121A 12” (305 mm) LF transducer with fully symmetric drive
- Advanced fourth-order crossover network with HF protection
- Coverage pattern: 60° x 40° Constant Directivity 12” rotatable waveguide
- 97 dB sensitivity, 131 dB maximum SPL
- System rating: 600 W continuous, 2400 W peak
- Active rating: LF 500 W/HF 75 W continuous (2000 W/300 W peak)
- (22) M10 threaded suspension points
EVF-1122D/64-FG features a 60° x 40° rotatable waveguide, design for far field long throw raw spread coverage pattern.
Specifications
Frequency Range (-10 dB) | 66 Hz - 21 kHz |
Suspension | (22) M10 threaded suspension points |
Weatherized | Yes |
Specifications |
Minimum Impedance | 6Ω |
Nominal Impedance (Passive) | 8Ω |
HF Transducer | DH7N, 3” (76 mm) diaphragm compression driver |
Speaker Type | Full-Range, Two-Way |
Frequency Response (-3 dB)¹ | 118 Hz - 18 Hz |
LF Nominal Impedance | 8Ω |
Max. SPL/1m (calc)² | 131dB |
Coverage (Nominal -6 dB) H | 60° |
LF Transducer | DVX3121A, 12” (305 mm) driver |
Coverage (Nominal -6 dB) V | 40° |
System Power Handling (Continuous/Program/Peak) | 600 continuous, 2400 peakWatts |
Crossover Frequency | 1300Hz |
Enclosure Material | 13-ply weather-resistant birch with fiberglass finish |
Grille | 18 GA stainless steel with hydrophobic cloth |
Sensitivity 1 W/1 m | 97 (1 W/1 m)dB |
Height | 768.6mm (30.26") |
Width | 406.3mm (16") |
Recommended High-Pass Frequency | 65Hz |
Depth | 413.3mm (16.27") |
Weight Net | 29.7kg (65.48 lbs) |
Shipping Weight | 34.4kg (75.84 lbs) |
Net Weight | 65.5 lb (29.7 kg) |
Dimensions (H x W x D) | 30.26” x 16.00” x 16.27” (768.6 x 406.3 x 413.3 )mm |
Input Connections | Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals, CDG dual-gland-nut input panel cover included for weatherizing |
Available Coverage Patterns (Nominal -6 dB) HxV | 60 x 40° |
Environmental Specs | IEC 60529 IP55 |
Internal Passive Crossover Frequency | 1300 HzHz |
Passive Power Handling | 2400W peak |
Videos
Recommended Amplifiersffs
For optimal sound system performance, Electro-Voice recommends the following amplifiers for EVF-1122D/64-FG.
Dynacord C‑SeriesLearn More |
Dynacord IPX SeriesLearn More |
Electro-Voice CPS SeriesLearn More |
|
---|---|---|---|
Two-Channel | ✔ | ||
Multi-Channel | ✔ | ✔ | |
DSP | ✔ | ✔ | |
Direct Drive | ✔ | ✔ | ✔ |
OMNEO (Dante, OCA) | ✔ | ||
Installation | ✔ | ✔ | ✔ |
Live Sound |
Where to Buy
Install Sound Partners
* Call for availability
Downloads
Warranty & After Sales Programs
Compatible Products
Similar Products