MFX-12MC

12" multi-use coax monitor

Summary & Images Specs Where to buy Downloads & Support
  • Multi-functional, coaxial, short-throw point source for stage monitoring, FOH, front fill, and side fill
  • Rugged tour-grade durability in a lightweight, ergonomic design
  • Low profile maximizes audience sight lines
  • Switched passive or biamp operation with factory presets for any application
  • Range of mounting accessories for live sound and fixed installation

MFX Multi-Functional Monitors deliver a new level of reference performance from compact, two-way, coaxial designs. In addition to their primary use as live sound stage monitors, they can also serve as shortthrow, full range sound reinforcement speakers (with or without subwoofer) and are appropriate for a wide range of permanent installations. The internal details of the cabinet were selected in order to maximize internal volume while maintaining a low stage profile to preserve sight lines. The input panel is recessed into the rear of the speaker, protecting connectors within the cabinet envelope. The panel includes NL4 input and loop-through connections, along with a passive/biamp switch.

MFX Multi-Function Monitors are an attractive investment for live sound companies because they can be deployed in multiple system roles, keeping more of the rental inventory working rather than sitting in the warehouse until an appropriate job is booked. EV has created a library of DSP settings to optimize the speakers for specific uses. The recommended MFX monitor amplifier match is the Dynacord TGX or IPX amplifier series. The loudspeaker settings run in Dynacord’s SONICUE control software, which loads them into the amplifier DSP section.

The constant directivity waveguide has a narrow pattern when the speaker is used horizontally as monitor, and a wide pattern when the cabinet is oriented vertically for use as a short-throw loudspeaker. The relatively large physical size of the waveguide controls coverage more uniformly and to a lower frequency than competitive models. The dimensions and location of the waveguide interact with the woofer to effectively create a bipole output, enhancing coverage control through the midrange frequencies. This configuration contributes to excellent gain-before-feedback performance. The waveguide also functions as a structural support (standoff) for the grille, even when a lead singer’s boot rests directly on the speaker.

The coaxial driver and horn assembly can be uninstalled and re-installed with a 90° rotation, which also rotates the coverage pattern; this is only recommended for install applications. Both models feature an integrated pole cup (neatly located in the side handle recesses) and four M10 suspension points to attach custom U brackets for wall-mount or flown use. Truss clamps, stand mount adapters, and a rigging bar are available for live or permanent installations.

Specifications

Frequency response (-3 dB)162 Hz - 18 kHz
Frequency range (-10 dB)150 Hz - 19 kHz
Rotatable coverage60° x 40° FOH, 40° x 60° Monitor

Rec. high-pass frequencyUse factory preset
Axial sensitivity197 dB (1 W/1 m)
Max. SPL2135 dB
Power handling3450 W (Continuous), 3000 W (Peak)
Nominal impedance passive8 Ω
Nominal impedance biamp LF8 Ω
Nominal impedance biamp HF8 Ω
TransducerCXCA3128-1CA
ConnectorsNeutrik NL4 input with NL4 pass through
Enclosure12-18-mm Baltic plywood with EVCoat
LogoRotatable
Monitor angles35° and 55°
Grille1.5-mm zinc plated steel with corrosion resistant coating
HandlesTwo with integrated cup for standard 35-mm pole
SuspensionFour M10 suspension points located to work with truss clamps, wall mounts, flying brackets and a full range of mounting accessories
ColorBlack (RAL 9005) or white (RAL 9003)
Dimensions (H x W x D)500 mm x 420 mm x 298 mm (19.7 in x 16.5 in x 11.7 in)
Net weight19 kg (41.9 lb)
Shipping weight21.2 kg (46.7 lb)
1 Half-space with monitor preset
2 Measured one meter on-axis, free field with 12dB crest factor pink noise
3 Continuous power EIA-426A, peak power 500-hour EV music abuse test

Videos

Recommended Amplifiers

For optimal sound system performance, Electro-Voice recommends the following amplifiers for MFX-12MC.

Related Products Learn More Related Products Learn More
Two-Channel
Multi-Channel
DSP
Direct Drive
OMNEO (Dante, OCA)
Installation
Live Sound

Where to Buy

Install Sound Partners

    * Call for availability

    Downloads

    Warranty & After Sales Programs

    Compatible Products

    sprites_global sprites_ev