EVF-1152D/94-FG
Premium Arrayable point-source 15” 90°x40° fully-weatherized loudspeaker
- Fully-weatherized fiberglass finish with gland nut and stainless-steel grille
- DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver
- DVX3151A 15” (381 mm) LF transducer with fully symmetric drive
- Advanced fourth-order crossover network with HF protection
- Coverage pattern: 90° x 40° Constant Directivity 12” rotatable waveguide
- 100 dB sensitivity, 134 dB maximum SPL
- System rating: 600 W continuous, 2400 W peak
- Active rating: LF 500 W/HF 75 W continuous (2000 W/300 W peak)
- (22) M10 threaded suspension points
EVF-1152D/94-FG features a 90° x 40° rotatable waveguide, design for medium field medium throw raw spread coverage pattern.
Mehr Technische Daten
| Freq. Response1 (-3 dB) |
107 Hz - 18 kHz | |||
| Freq. Range1 (-10 dB) | 58 Hz - 21 kHz | |||
| Rotatable Coverage | 90° x 40° | |||
Specifications |
||||
| Rec. High-Pass Frequency | 55 Hz |
| Passive Crossover Freq. | 1300 Hz |
| Axial Sensitivity1 | 100 dB (1 W/1 m) |
| Max. Calculated SPL1 | 134 dB |
| Passive Power Handling2 | 600 W continuous, 2400 W peak |
| Impedance | 8 ohms (nominal), 6.0 ohms (min.) |
| LF Transducer - DVX3151A, 15” (381 mm) driver | |
| LF Axial Sensitivity4 | 100 dB (1 W/1 m) |
| LF Max. Calculated SPL | 133 dB |
| LF Power Handling3 | 500 W continuous, 2000 W peak |
| LF Impedance | 8 ohms (nominal), 7.2 ohms (min.) |
| HF Transducer - DH7N, 3” (76 mm) diaphragm compression driver | |
| HF Axial Sensitivity4 | 112 dB (1 W/1 m) |
| HF Max. Calculated SPL | 137 dB |
| HF Power Handling3 | 75 W continuous, 300 W peak |
| HF Impedance | 8 ohms (nominal), 6.0 ohms (min.) |
| Connectors | Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals, CDG dual-gland-nut input panel cover included for weatherizing |
| Enclosure | 13-ply weather-resistant plywood with fiberglass finish |
| Grille | 18 GA stainless steel with hydrophobic cloth |
| Environmental | IEC 60529 IP55 |
| Suspension | (22) M10 threaded suspension points |
| Dimensions (H x W x D) |
30.26” x 18.50” x 18.37” (768.6 mm x 469.8 mm x 466.6 mm) |
| Weight | 75.7 lb (34.4 kg) net, 86.0 lb (39.1 kg) shipping |
| 1 Half-space measurement. 2 EIA RS-426A, tested for eight hours. 3 AES 2-1984, tested for eight hours. 4 Arithmetic averages, 300 - 1,300 Hz (LF) and 1,300 - 5,000 Hz (HF). |
|
Videos
EV Innovation
EV Innovation – Installed Performance Loudspeaker Portfolio Webinar
Recommended Amplifiersffs
For optimal sound system performance, Electro-Voice recommends the following amplifiers for EVF-1152D/94-FG.
Dynacord C‑SeriesErfahren Sie mehr |
Dynacord IPX SeriesErfahren Sie mehr |
Electro-Voice CPS SeriesErfahren Sie mehr |
|
|---|---|---|---|
| Two-Channel | ✔ | ||
| Multi-Channel | ✔ | ✔ | |
| DSP | ✔ | ✔ | |
| Direct Drive | ✔ | ✔ | ✔ |
| OMNEO (Dante, OCA) | ✔ | ||
| Installation | ✔ | ✔ | ✔ |
| Live Sound |
Downloads
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Garantie & Kundendienst-Programme
Compatible Products
Similar Products
