CPS 4.10

1000 W/CH 4‑CH amplifier

Summary & Images Specs Downloads & Support

Four channels in one compact rack-efficient unit
1000 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
Rear-mounted attenuators
Switchable 50 Hz high-pass filter (Hi-Z mode)
Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
Phoenix-type input and output connections
Remote power-on/off contact
Programmable power-on delay settings
Front-to-rear fans

Specifications

Height	88.1mm (3.47")
Width	482.6mm (19")
Depth	421.5mm (16.59")
Specifications

Weight Net	11.1kg (24.47 lbs)
Frequency Response (-3 dB)	15 Hz-30 kHz
Impedance	2/4/8/8 VLD/70 V/100VΩ
Slew Rate	28V/µs
Audio Network	No
Intermodulation Distortion (SMPTE)	0.05%
Variable Load Drive (VLD)	Yes
DIM 30	0.02%
Topology	Class-D
Signal-to-Noise Ratio (A-weighted)	103dB
Input Impedance (Balanced)	20kΩ
Input Sensitivity	0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Network Control (IRIS-Net)	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 4Ω	1000Watts
Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
Continuous Rated Power (1 kHz, THD 1%) 100v	1000Watts
Continuous Rated Power (1 kHz, THD 1%) 70v	1000Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	900Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v	900Watts
Electronics Type	Amplifier
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v	900Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1000Watts
Analog Inputs	4, electronically balanced, Phoenix-type
Continuous Rated Power (1 kHz, THD 1%) 8Ω	500Watts
Maximum Input Voltage	+22 (9.76 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω	450Watts
Maximum Bridged Output 8Ω	2000Watts
Mains Voltage	220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω	2000Watts
CAN Bus Interface	Optional (RCM-810 card)
Total Harmonic Distortion	0.05%
Cooling	Front-to-Rear, continuously variable fans

Videos

EV Case Study - Sapphire Ice & Leisure, UK

Electro-Voice CPS Multi-Channel Amplifiers @ InfoComm 2009

Downloads

Let's talk

Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include: