PA4150L
Quad 150 W/CH power amplifier
- Flexible multi-channel power for installation
- Ideal for sound reinforcement, paging, and life safety
- 150 W per channel into 4 Ω
- Bridged mode for dual 315 W outputs into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
Specifications
| Height | 88mm (3.46") |
| Width | 483mm (19.02") |
| Depth | 406mm (15.98") |
Specifications |
|
| Weight Net | 18kg (39.68 lbs) |
| Frequency Response (-3 dB) | < 10Hz - 40kHz (-1dB, ref. 1kHz) |
| Impedance | 4/8Ω |
| Crosstalk | < < -75dB (ref. 1kHz, @ 10% rated output power) |
| Rated output power (*rated load) THD < 1%, 1kHz | 160/100W (4ω/8ω) |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 150Watts |
| Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | 150/75W (4ω/8ω) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω | 160Watts |
| Channels | 4 |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω | 100Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 75Watts |
| Total Harmonic Distortion | < 0.1% |
| Slew Rate | 16V/µs |
| Intermodulation Distortion (SMPTE) | < 0.1% |
| DIM 30 | < 0.1% |
| Signal-to-Noise Ratio (A-weighted) | 101dB |
| Input Impedance (Balanced) | > 20kΩ |
| Input Sensitivity | 0 dBu (775mV) (@ rated output power or voltage, 1kHz) |
| Number of Channels | 4 |
| Network Control (IRIS-Net) | No |
| Amplifier Gain | 30dB |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω | 160Watts |
Downloads
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Warranty & After Sales Programs
