CPS 4.10

Contractor precision系列4" 功放

Summary & Images Specs Where to buy Downloads & Support

4条功放通道，每条通道可以作为低阻抗或高阻抗运行，每条通道输出功率最高可达1000W；Phoenix型输入和输出连接；远程on/off机触点；背装式衰减器；用于可选的RCM-810卡的模块插槽，支持IRIS-Net控制和监视；可选的RCM-810卡，能在IRIS-Net中进行VLD配置，并牟每条输出通道功率进行配置，以便与2-10 Ω的任何负载相匹配，负载增幅为0.1Ω；在Hi-Z模式下运行时，采用50 Hz高通滤波器；D类设计，可实现最佳效率；配有保护箱

CPS4.5是Electro-Voice的4通道功放，采用了突破性的D类技术，以实现功放效率最大化。可以输出2Ω、4Ω、70V或100V线路，无需变压器。此外，功放通道可以成对桥接，使输出功率翻倍。用于可选的RCM-810远程控制模块的模块插槽具备控制网络功能，支持通过IRIS-Net软件以及可变负载驱动（VLD）进行远程系统诊断。

Specifications

Height	88.1
Width	482.6
Depth	421.5
产品规格

Weight Net	11.1
Frequency Response (-3 dB)	15 Hz-30 kHz
Impedance	2/4/8/8 VLD/70 V/100V
Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 ((100V))
Continuous Rated Power (1 kHz, THD 1%) 100v	1000
Continuous Rated Power (1 kHz, THD 1%) 70v	1000
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	900
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v	900
Electronics Type	Amplifier
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v	900
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1000
Analog Inputs	4, electronically balanced, Phoenix-type
Continuous Rated Power (1 kHz, THD 1%) 8Ω	500
Maximum Input Voltage	+22 (9.76 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω	450
Maximum Bridged Output 8Ω	2000
Mains Voltage	220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω	2000
CAN Bus Interface	Optional (RCM-810 card)
Total Harmonic Distortion	0.05
Cooling	Front-to-Rear, continuously variable fans
Slew Rate	28
Audio Network	No
Intermodulation Distortion (SMPTE)	0.05
Variable Load Drive (VLD)	Yes
DIM 30	0.02
Topology	Class-D
Signal-to-Noise Ratio (A-weighted)	103
Input Impedance (Balanced)	20
Input Sensitivity	0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Network Control (IRIS-Net)	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 4Ω	1000