EVH-1152D/43

Premium Arrayable point-source coaxial horn loaded loudspeaker

Summary & Images Specs Where to buy Downloads & Support

Ideal for reverberant spaces
Pattern control maintained down to 500 Hz
15-inch SMX2151 woofer
3-inch DH7N titanium/neodymium HF compression driver
Rotatable Constant-directivity waveguide
Six available coverage patterns from 40º x 30º to 90º x 90º
106 dB sensitivity, 139 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
4th-order passive crossover with HF protection
Trapezoidal enclosure in three finishes: EVCoat, FG or PI
M10 threaded suspension points (28)

The EVH-1152D/43 utilizes the DH7N, a high-output 3” titanium compression driver, coupled to a Constant Directivity 40° x 30° waveguide. The SMX2151 15” woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability. This combination of technologies results in a smooth response to 20 kHz and excellent pattern control down to 500 Hz.

Technische Daten

Frequency Range (-10 dB)	50 Hz - 20 kkHz
Suspension	(28) M10 threaded suspension points
Minimum Impedance	6.0Ω
Technische Daten

Nominal Impedance (Passive)	8Ω
HF Transducer	DH7N, 3" (76 mm) diaphragm compression driver
Frequency Response (-3 dB)¹	60 Hz - 17 kHz
Max. SPL/1m (calc)²	139dB
Coverage (Nominal -6 dB) H	40°
LF Transducer	SMX2151, 15" (381 mm) driver
Coverage (Nominal -6 dB) V	30°
System Power Handling (Continuous/Program/Peak)	500/1000/2000 Watts
Crossover Frequency	1300Hz
Enclosure Material	13-ply weather-resistant birch with EVCoat
Grille	16 GA powder-coated galvanneal with rotatable logo
Sensitivity 1 W/1 m	106dB
Height	768.6mm (30.26")
Width	768.6mm (30.26")
Recommended High-Pass Frequency	60Hz
Depth	680.1mm (26.78")
Weight Net	66.1kg (145.73 lbs)
Input Connections	Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals