X12-125F
Dual 15" flying subwoofer
- Super-high-output dual HWNS4158 15" woofers maintain low distortion at extremely high SPLs
- Dual front and rear signal connection points for front-firing or cardioid deployment
- Integrated rigging shortens load-in and load-out times
- Integrates easily into 2-, 3-, and 4-way system configurations with other X-Line Advance loudspeakers
The X-Line Advance X12-125F subwoofer produces impressive low-frequency impact and performance without losing musicality. In addition to its high output capability, the X12-125F is designed to acoustically match seamlessly with any X-Line Advance top cabinet as a ground stack subwoofer or as a flown subwoofer/LF array. Use Electro-Voice PREVIEW Loudspeaker Software to quickly and accurately achieve your desired coverage and confirm that your configuration is mechanically valid. PREVIEW also provides tools for the creation of steered/shaped subwoofer arrays.
Specifications
| Frequency response (-3 dB)1 | 36 - 215 Hz |
|||
| Frequency response (-10 dB)1 |
29 - 1650 Hz | |||
| Coverage (H x V) |
Omni directional |
|||
Specifications |
||||
| Rec. high-pass frequency |
914 mm (36 in) |
| Max calculated SPL1 | 134 dB continuous, 140 dB peak |
| Configuration | Parallel mode: Both woofers are internally wired in parallel on Pins 1+/1-. Dual mode: Each woofer is wired separately on Pins 1+/1- and 2+/2-. |
| Axial sensitivity1 | 99 dB (1 W/1 m) |
| Passive power handling2 | 3000 W continuous, 12,000 W peak |
| Impedance | (1) 4 ohm (parallel mode), (2) 8 ohm (dual mode) |
| LF transducer | 2 x 15 in HWNS4158 |
| Connectors | (4) NL8 type connectors (Two in front and two in back) |
| Enclosure | 13-ply weather resistant birch with EVCoat, internally braced |
| Grille | 14 GA powder coated galvanneal |
| Dimensions (H x W x D) | 52.07 cm x 110.34 cm x 77.50 cm (20.50 in x 43.44 in x 30.51 in) |
| Net weight | 198 lb (89.8 kg) |
| Shipping weight | 210 lb (95.3 kg) |
| 1 Half-space anechoic measurement of single element. 2AES 2-1984 power test. |
|
Compatible Products
Recommended Amplifiers
For optimal sound system performance, Electro-Voice recommends the following amplifiers for X12-125F.
Dynacord TGX SeriesLearn More |
Dynacord IPX SeriesLearn More |
|
|---|---|---|
| Two-Channel | ||
| Multi-Channel | ✔ | ✔ |
| DSP | ✔ | ✔ |
| Direct Drive | ✔ | ✔ |
| OMNEO (Dante, OCA) | ✔ | ✔ |
| Installation | ✔ | |
| Live Sound | ✔ |
Downloads
| Name | Size | Date |
|---|---|---|
| Environmental Compliance Document | 148KB | 10.03.2017 |
| Name | Language | Size | Date |
|---|---|---|---|
| X12-125F Engineering Data Sheet | EN | 1.18MB | 10.24.2019 |
| Name | Language | Size | Date |
|---|---|---|---|
| X-Line Advance System Rigging and Transport Manual | EN | 56.63MB | 02.11.2020 |
| Name | Size | Date | |
|---|---|---|---|
| EV SpeakerDB v1.1+ IRIS | ZIP | 28.48MB | 02.10.2020 |
| Name | Size | Date |
|---|---|---|
| Electro-Voice_PREVIEW_Early_Adopter_Windows_Beta_v1.4.1_Setup.exe | 113.86MB | 07.29.2020 |
| Electrovoice-PREVIEW_Early_Adopter_MacOS_Beta_ v1.4.1.pkg | 249.57MB | 07.29.2020 |
X-Line HighRes Front3Quarter NoShadow Web
X Line HighRes FrontStraight NoShadow Web
X-Line HighRes Rear3Quarter NoShadow Web