EVID-C4.2LP

Ceiling speaker 4" low profile white

Summary & Images Specs Where to buy Downloads & Support
  • Low profile 4” coaxial two-way (3.7” deep)
  • Full bandwidth overload protection
  • Front baffle wattage tap adjustment
  • Includes tile bridge and mounting ring for easy installation
  • UL1480A and CSA 22.2 205 certified

The Electro-Voice EVID-C4.2LP loudspeaker system is a complete two-way ceiling loudspeaker in a very low profile package. The package consists of a bezel assembly, grille, rear enclosure, 4-inch coax two-way loudspeaker and internal line-matching transformer.

The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID-C4.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The EVID-C4.2LP utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5 or 15 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semigloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The low profile enclosure makes it easy to mount in very tight spaces. A side cover provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the EVIDC4.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

Mehr Technische Daten

Frequency response60 Hz - 20 kHz
Sensitivity (SPL 1 W/1 m)86 dB
Coverage pattern130° conical
Power handling (@ 8Ω)50 W (with overload protection)

Rated Impedance8 Ω
Recommended High-Pass frequency65 Hz
Input configuration8Ω; 70V/100V
70V/100V power taps1.8 (70V only)/3.7/7.5/15/30 W
LF transducer4 in (100 mm) high-compliance driver (weatherized cone)
HF transducer0.75 in (19 mm) Ti-coated dome
Mounting systemIntegrated 4-point toggle anchors
Acoustic designPorted cabinet, two-way design, internally damped, w/passive crossover
Cabinet constructionSteel enclosure and UL94V-0 rated baffle and bezel
Grille constructionPowder-coated steel
ColorWhite (paintable)
Cutout dimensions (diam.)10.6 in (269 mm)
Dimensions (depth x diam.)3.7 in x 11.8 in (94 mm x 300 mm)
Net weight7.35 lb (3.32 kg)
Included accessoriesTile bridge, mounting ring
Safety agency ratingsUL 1480
Safe for use in air handling spaces per UL 2043

Recommended Amplifiers

As part of The Bosch Group, Electro-Voice is dedicated to loudspeakers and microphones and Dynacord is dedicated to amplifiers, DSP and software. The depth of our shared R&D resources are geared towards bringing customers the best of both worlds: state-of-the-art loudspeaker and microphone technology from Electro-Voice, and world-class electronics engineering and software design from Dynacord.

For optimal sound system performance, Electro-Voice recommends the following amplifiers.

Electro-Voice Dynacord Loud&Clear

Learn more about C Series amplifiers by Dynacord
Dynacord C Series

Two-channel power amplifiers for fixed install

Learn more about V Series amplifiers by Dynacord
Dynacord V Series

Multi-channel power amplifier for commercial installations

Learn more about Electro-Voice CPS Series
Electro-Voice CPS Series

CPS contractor precision series amplifiers

Learn more about Electro-Voice PA Series
Electro-Voice PA Series

PA series multi-channel power for fixed install applications

Two-Channel
Multi-Channel
powerTANK
DSP
Direct Drive
OMNEO (Dante, OCA)
Installation

Where to Buy

Install Sound Partners

Install Where To Buy

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  1. System Design
  2. Installation
  3. Programming & Commissioning
Get started

Downloads

Garantie & Kundendienst-Programme

Compatible Products

Similar Products

sprites_global sprites_ev