OM-1 Omneo/dante module by Electro-Voice


Omneo/dante module

  • Gigabit Ethernet Interface - 1000 Mbit/s full-duplex Ethernet Interface, IEEE 802.3u compatible
  • Secondary Gigabit Ethernet Interface - Second Ethernet Interface for the connection of a redundant network to establish fault-tolerant systems
  • Status LEDs - Link, Activity and Gigabit active status indication for each Ethernet interface

The OM-1 is a compact interface module which is prepared for connecting an Electro-Voice N8000 to an OMNEO network. In addition, the OM-1 is able to send and receive Dante audio to and from other Dante equipment. The transmission of up to 32 digital audio input signals and 32 digital audio output channels with low latency (typically 1 ms) is possible with the OM-1.

Dante is a registered trademark of Audinate, Inc.


Connector Type Ethernet, 100/1000 Mbit/s, RJ-45, integrated transformer isolation
Height 1.06" (27mm)
Width 3.5" (89mm)

Depth 3.62" (92mm)
Weight Net 2.65oz (75g)
Sample Rate 48 kHz
Data Format 24 Bit
Supply Voltage +3.3 V DC / 860mA
Audio Flows Up to 32 ✕ 32 simultaneous audio streams
Latency across network ≤ 1ms (typically)
Operating Temperature Range -5 °C to 45
Audio Channels Up to 32 ✕ 32 at 48 kHz
Electromagnetic Environment E1, E2, E3



Downloads Library

Where to Buy

Install Sound Partners

Install Where To Buy

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  1. System Design
  2. Installation
  3. Programming & Commissioning
Get started

Warranty & After Sales Programs

sprites_global sprites_ev