PA2450L
Dual 450 W/CH power amplifier
- Reliable high-quality power for installation
- Ideal for sound reinforcement, paging, and life safety
- 450 W per channel @ 4 Ω (1 kHz)
- Bridged mono out for 900 W into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
Specifications
| Height | 3.46" (88mm) |
| Width | 19.02" (483mm) |
| Depth | 15.98" (406mm) |
Specifications |
|
| Frequency Response (-3 dB) | < 10Hz - 40kHz |
| Weight Net | 36.38lbs (16.5kg) |
| Total Harmonic Distortion | < 0.1% (@ rated output power MBW=80kHz, 1kHz) |
| Slew Rate | 28V/µs |
| Intermodulation Distortion (SMPTE) | < 0.1% (60Hz, 7kHz) |
| DIM 30 | < 0.1% (3.15kHz, 15kHz) |
| Signal-to-Noise Ratio (A-weighted) | 104dB |
| Input Impedance (Balanced) | > 20kΩ |
| Input Sensitivity | 0 dBu (775mV) |
| Number of Channels | 2 |
| Network Control (IRIS-Net) | No |
| Amplifier Gain | 34.3dB |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω | 450Watts |
| Impedance | 4/8Ω |
| Crosstalk | < < -75dB (ref. 1kHz, @ 10% rated output power) |
| Rated output power (*rated load) THD < 1%, 1kHz | 450/220W (4ω/8ω) |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 400Watts |
| Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | 400/200W (4ω/8ω) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω | 450Watts |
| Channels | 2 |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω | 220Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 200Watts |
Where to Buy
Install Sound Partners
Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Downloads
Warranty & After Sales Programs
Similar Products
