PA2400T
Dual 400 W/CH power amplifier
- Efficient performance for low impedance or distributed systems
- Ideal for sound reinforcement, paging, and life safety
- 400 W per channel for 4 Ω or 70/100 V lines
- Bridged mono out for 860 W into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
Specifications
Height | 88mm (3.46") |
Width | 483mm (19.02") |
Depth | 406mm (15.98") |
Specifications |
Weight Net | 26kg (57.32 lbs) |
Frequency Response (-3 dB) | 65Hz - 40kHz (-1dB, ref. 1kHz) |
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v | 400Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v | 400Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 400Watts |
Continuous Rated Power (1 kHz, THD 1%) 2Ω | 430Watts |
Impedance | 4/8Ω (70V/100V) |
Continuous Rated Power (1 kHz, THD 1%) 8Ω | 215Watts |
Crosstalk | < < -75dB |
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 200Watts |
Rated output power (*rated load) THD < 1%, 1kHz | 430/215W (70V/100V-430) |
Total Harmonic Distortion | < 0.1% |
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | 400/200W (70V/100V-400) |
Slew Rate | 25V/µs (70V-46, 100V-65) |
Channels | 2 |
Intermodulation Distortion (SMPTE) | < 0.1% |
DIM 30 | < 0.1% |
Signal-to-Noise Ratio (A-weighted) | 103dB |
Input Impedance (Balanced) | > 20kΩ |
Input Sensitivity | 0 dBu (775mV) (@ rated output power or voltage, 1kHz) |
Number of Channels | 2 |
Network Control (IRIS-Net) | No |
Amplifier Gain | 34dB |
Continuous Rated Power (1 kHz, THD 1%) 100v | 430Watts |
Continuous Rated Power (1 kHz, THD 1%) 4Ω | 430Watts |
Continuous Rated Power (1 kHz, THD 1%) 70v | 430Watts |
Where to Buy
Install Sound Partners
* Call for availability
Downloads