PA2450L Dual 450 W/CH power amplifier by Electro-Voice

PA2450L

Dual 450 W/CH power amplifier

  • Reliable high-quality power for installation 
  • Ideal for sound reinforcement, paging, and life safety 
  • 450 W per channel @ 4 Ω (1 kHz)
  • Bridged mono out for 900 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

Specifications

Height 3.46" (88mm)
Width 19.02" (483mm)
Depth 15.98" (406mm)

Frequency Response (-3 dB) < 10Hz - 40kHz
Weight Net 36.38lbs (16.5kg)
Rated output power (*rated load) THD < 1%, 1kHz 450/220W (4ω/8ω)
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 400Watts
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 400/200W (4ω/8ω)
Continuous Rated Power (1 kHz, THD 1%) 2Ω 450Watts
Channels 2
Continuous Rated Power (1 kHz, THD 1%) 8Ω 220Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 200Watts
Total Harmonic Distortion < 0.1% (@ rated output power MBW=80kHz, 1kHz)
Slew Rate 28V/µs
Intermodulation Distortion (SMPTE) < 0.1% (60Hz, 7kHz)
DIM 30 < 0.1% (3.15kHz, 15kHz)
Signal-to-Noise Ratio (A-weighted) 104dB
Input Impedance (Balanced) > 20kΩ
Input Sensitivity 0 dBu (775mV)
Number of Channels 2
Network Control (IRIS-Net) No
Amplifier Gain 34.3dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω 450Watts
Impedance 4/8Ω
Crosstalk < < -75dB (ref. 1kHz, @ 10% rated output power)

Downloads

Downloads Library

Where to Buy

Install Sound Partners

Install Where To Buy

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  1. System Design
  2. Installation
  3. Programming & Commissioning
Get started

Warranty & After Sales Programs

Similar Products

sprites_global sprites_ev