EVF-1122D/99-FG

Premium Arrayable point-source 12” 90°x90° fully-weatherized loudspeaker

Summary & Images Specs Where to buy Downloads & Support

Fully-weatherized fiberglass finish with gland nut and stainless-steel grille
DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver
DVX3121A 12” (305 mm) LF transducer with fully symmetric drive
Advanced fourth-order crossover network with HF protection
Coverage pattern: 90° x 90° Constant Directivity 12” rotatable waveguide
97 dB sensitivity, 131 dB maximum SPL
System rating: 600 W continuous, 2400 W peak
Active rating: LF 500 W/HF 75 W continuous (2000 W/300 W peak)
(22) M10 threaded suspension points

EVF-1122D/99-FG features a 90° x 90° rotatable waveguide, design for near field wide throw raw spread coverage pattern.

Specifications

Frequency Range (-10 dB)	66 Hz - 21 kHz
Suspension	(22) M10 threaded suspension points
Weatherized	Yes
Specifications

Minimum Impedance	6Ω
Nominal Impedance (Passive)	8Ω
HF Transducer	DH7N, 3” (76 mm) diaphragm compression driver
Speaker Type	Full-Range, Two-Way
Frequency Response (-3 dB)¹	118 Hz - 18 Hz
LF Nominal Impedance	8Ω
Max. SPL/1m (calc)²	131dB
Coverage (Nominal -6 dB) H	90°
LF Transducer	DVX3121A, 12” (305 mm) driver
Coverage (Nominal -6 dB) V	90°
System Power Handling (Continuous/Program/Peak)	600 continuous, 2400 peakWatts
Crossover Frequency	1300Hz
Enclosure Material	13-ply weather-resistant birch with fiberglass finish
Grille	18 GA stainless steel with hydrophobic cloth
Sensitivity 1 W/1 m	97 (1 W/1 m)dB
Height	30.26" (768.6mm)
Width	16" (406.3mm)
Recommended High-Pass Frequency	65Hz
Depth	16.27" (413.3mm)
Weight Net	65.48lbs (29.7kg)
Shipping Weight	75.84lbs (34.4kg)
Available Coverage Patterns (Nominal -6 dB) HxV	90 x 90°
Environmental Specs	IEC 60529 IP55
Internal Passive Crossover Frequency	1300 HzHz
Passive Power Handling	2400W peak
Net Weight	65.5 lb (29.7 kg)
Dimensions (H x W x D)	30.26” x 16.00” x 16.27” (768.6 x 406.3 x 413.3 )mm
Input Connections	Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals, CDG dual-gland-nut input panel cover included for weatherizing

Videos

EV Innovation

EV Innovation Ã¢â‚¬â€œ Installed Performance Loudspeaker Portfolio Webinar

Recommended Amplifiersffs

For optimal sound system performance, Electro-Voice recommends the following amplifiers for EVF-1122D/99-FG.

	Dynacord C‑Series Two‑Channel Power Amplifiers for Fixed Install Learn More	Dynacord IPX Series IPX series multi-channel power amplifiers for fixed install applications Learn More	Electro-Voice CPS Series CPS contractor precision series amplifiers Learn More
Two-Channel	✔
Multi-Channel		✔	✔
DSP	✔	✔
Direct Drive	✔	✔	✔
OMNEO (Dante, OCA)		✔
Installation	✔	✔	✔
Live Sound

Where to Buy

Install Sound Partners

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

System Design
Installation
Programming & Commissioning

Get started

Downloads

Technical Documentations

A/E Specification

Name	Language & Download
EVF 1122D-99_FGB A&E Specification	EN
EVF 1122D-99_FGW A&E Specification	EN

Certification/Regulatory

Name	Language & Download
EVF EU Declaration of Conformity (2023-Jun)	EN
EVF UKCA Declaration of Conformity (2023-Jun)	EN

Engineering Data Sheet

Name	Language & Download
EVF-1122D/99-FG Engineering Data Sheet	EN

Manual

Name	Language & Download
EV-I Access Card User Instructions	EN
EVF & EVH User Manual	EN
EVF-UB Installation Instructions	EN
Rigging Kits for EVF & EVH	EN

Service Policies

Name	Language & Download
Warranty conditions for Electro-Voice products in North America	EN

White Paper

Name	Language & Download
Audio 101 - Basic Audio Terminology	EN
Audio 101 - Loudspeaker Basics	EN
EASE Data Explanation	EN
PA Bible 02: Power Handling Capacity	EN
PA Bible 06: The Constant Directivity White Horn White Paper	EN
The EV PA Bible	EN
The PA Bible Chapter Zero	EN