EVID C8.2LP
8” two-way coaxial ceiling loudspeaker
- Low Profile 8" coaxial two-way
- Waveguide coupled Ti Tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
- Includes tile bridge and mounting ring for easy installation
- Integrated ported enclosure for extended bass response
- Ideal for ceiling spaces with tight clearance UL and CE listed
The Electro-Voice EVID C8.2LP loudspeaker system is a complete two-way ceiling loudspeaker in a low profile package.
The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID C8.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2LP utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel.
The low profile enclosure makes it easy to mount in tight spaces.
A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
Specifications
Max Calculated SPL | 60 watt Transformer coupled @ 4 meters: 92 dB 100 watt Direct coupled @ 4 meters: 95 dBdB |
HF Transducer | 1 in (25 mm) Ti Mylar laminate |
LF Transducer | 8 in. (200 mm) Polypropylene cone |
Specifications |
Grille | Perforated powder coated steel wit safety tether |
Impedance | 8 Ohms nominal (transformer bypass) |
Transformer Taps | 70V: 1.88, 3.75, 7.5, 15 or 30 100V: 3.75, 7.5, 15 or 30W Bypass: 8 Ohms |
Connectors | Phoenix type removable, with scre terminals and "loop-thru", accepts 12 ga wire |
Enclosure | Baffle- UL 94V-O rated AB Backcan-Zinc plated steel |
Dimensions (H x Dia) | 7.0" x 10.6 (178mm x 270mm) |
Cutout Size | 10.75" (272mm) |
Net Weight | 11.0 lbs (5.0 kg) |
Shipping Weight:(pair) | 24.0 lbs (11.0 kg) |
Support Hardware | Tile bridge, backing plate support cutout template, paint shield |
Freq. Response (-10 dB) | 50 Hz - 20 kHzdb |
Coverage (Conical) | 110° |
Power Handling | 75 W Cont. / 300 W Peak |
Sensitivity (SPL 1W/1m) | 91 dB |
Network | Network and transducers protected 12 dB/oct 2.6 kHz |
Safety Agency Ratings | UL 1480 Safe for use in air handling spaces per UL 2043 |
Videos
Recommended Amplifiers
As part of The Bosch Group, Electro-Voice is dedicated to loudspeakers and microphones and Dynacord is dedicated to amplifiers, DSP and software. The depth of our shared R&D resources are geared towards bringing customers the best of both worlds: state-of-the-art loudspeaker and microphone technology from Electro-Voice, and world-class electronics engineering and software design from Dynacord.
For optimal sound system performance, Electro-Voice recommends the following amplifiers.
Two-channel power amplifiers for fixed install |
Multi-channel power amplifier for commercial installations |
CPS contractor precision series amplifiers |
PA series multi-channel power for fixed install applications |
|
---|---|---|---|---|
Two-Channel | ✓ | |||
Multi-Channel | ✓ | ✓ | ✓ | |
powerTANK | ✓ | |||
DSP | ✓ | |||
Direct Drive | ✓ | ✓ | ✓ | |
OMNEO (Dante, OCA) | ||||
Installation | ✓ | ✓ | ✓ | ✓ |
Where to Buy
Install Sound Partners
Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Downloads
Technical Documentations
Name | Language & Download |
---|---|
EVID C8.2LP A&E Specification | EN |
Name | Language & Download |
---|---|
EVID Ceiling Speaker Systems Application Guide | EN |
Name | Language & Download |
---|---|
EVID C8.2LP Ceiling Engineering Data Sheet | EN |
Name | Language & Download |
---|---|
EVID Ceiling Speaker Systems Installation manual (C4.2 C4.2LP C8.2 C6.2 C8.2LP C8.2HC C10.1) | EN DE ES FR IT PT RU ZH |
Ceiling Speaker User Manual | EN |
EVID Accessories | EN |
EVID Design & Installation Reference Guide | EN |
EVID RR/RPK Assembly & Installation Instructions | EN |
RR, RPK Series Assembly & Installation Instructions | EN |
Name | Language & Download |
---|---|
Warranty conditions for Electro-Voice products in North America | EN |
Software, Firmware & Design Tools
Name | Language & Download |
---|---|
Ceiling Speaker Layout Calculator | Download |
Name | Language & Download |
---|---|
EVID Ceiling Speakers CAD Drawings | Download |
Name | Language & Download |
---|---|
EVID GLL V1.0 | Download |
Name | Language & Download |
---|---|
EVID Arrayshow | Download |
Warranty & After Sales Programs
Similar Products