PA2400T

Dual 400 W/CH power amplifier

Summary & Images Specs Where to buy Downloads & Support
  • Efficient performance for low impedance or distributed systems 
  • Ideal for sound reinforcement, paging, and life safety 
  • 400 W per channel for 4 Ω or 70/100 V lines
  • Bridged mono out for 860 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

Technische Daten

Height 88mm (3.46")
Width 483mm (19.02")
Depth 406mm (15.98")

Weight Net 26kg (57.32 lbs)
Frequency Response (-3 dB) 65Hz - 40kHz (-1dB, ref. 1kHz)
DIM 30 < 0.1%
Signal-to-Noise Ratio (A-weighted) 103dB
Input Impedance (Balanced) > 20kΩ
Input Sensitivity 0 dBu (775mV) (@ rated output power or voltage, 1kHz)
Number of Channels 2
Network Control (IRIS-Net) No
Amplifier Gain 34dB
Continuous Rated Power (1 kHz, THD 1%) 100v 430Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 430Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 430Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 400Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 400Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 400Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 430Watts
Impedance 4/8Ω (70V/100V)
Continuous Rated Power (1 kHz, THD 1%) 8Ω 215Watts
Crosstalk < < -75dB
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 200Watts
Rated output power (*rated load) THD < 1%, 1kHz 430/215W (70V/100V-430)
Total Harmonic Distortion < 0.1%
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 400/200W (70V/100V-400)
Slew Rate 25V/µs (70V-46, 100V-65)
Channels 2
Intermodulation Distortion (SMPTE) < 0.1%

Where to Buy

Install Sound Partners

    * Call for availability

    Downloads

    Garantie & Kundendienst-Programme

    Similar Products

    sprites_global sprites_ev