EVF-1152D/43-FG
Single 15” 2‑way 40°x30° full‑range fully‑weatherized loudspeaker system
- Fully-weatherized fiberglass finish with gland nut and stainless-steel grille
- DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver
- DVX3151A 15” (381 mm) LF transducer with fully symmetric drive
- Advanced fourth-order crossover network with HF protection
- Coverage pattern: 40° x 30° Constant Directivity 12” rotatable waveguide
- 100 dB sensitivity, 134 dB maximum SPL
- System rating: 600 W continuous, 2400 W peak
- Active rating: LF 500 W/HF 75 W continuous (2000 W/300 W peak)
- (22) M10 threaded suspension points
EVF-1152D/43-FG features a 40° x 30° rotatable waveguide, design for extreme far field long throw raw spread coverage pattern.
Specifications
| Frequency Range (-10 dB) | 66 Hz - 21 kHz |
| Suspension | (22) M10 threaded suspension points |
| Weatherized | Yes |
Specifications |
|
| Minimum Impedance | 6Ω |
| Nominal Impedance (Passive) | 8Ω |
| HF Transducer | DH7N, 3” (76 mm) diaphragm compression driver |
| Speaker Type | Full-Range, Two-Way |
| Frequency Response (-3 dB)¹ | 118 Hz - 18 Hz |
| LF Nominal Impedance | 8Ω |
| Max. SPL/1m (calc)² | 131dB |
| Coverage (Nominal -6 dB) H | 40° |
| LF Transducer | - DVX3121A, 12” (305 mm) driver |
| Coverage (Nominal -6 dB) V | 30° |
| System Power Handling (Continuous/Program/Peak) | 600 continuous, 2400 peakWatts |
| Crossover Frequency | 1300Hz |
| Enclosure Material | 13-ply weather-resistant birch with fiberglass finish |
| Grille | 18 GA stainless steel with hydrophobic cloth |
| Sensitivity 1 W/1 m | 97 (1 W/1 m)dB |
| Height | 30.26" (768.6mm) |
| Width | 18.5" (469.8mm) |
| Recommended High-Pass Frequency | 65Hz |
| Depth | 18.37" (466.6mm) |
| Weight Net | 75.84lbs (34.4kg) |
| Shipping Weight | 86.2lbs (39.1kg) |
| Input Connections | Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals, CDG dual-gland-nut input panel cover included for weatherizing |
| Available Coverage Patterns (Nominal -6 dB) HxV | 40 x 30° |
| Environmental Specs | IEC 60529 IP55 |
| Internal Passive Crossover Frequency | 1300 HzHz |
| Passive Power Handling | 2400W peak |
| Net Weight | 65.5 lb (29.7 kg) |
| Dimensions (H x W x D) | 30.26” x 16.00” x 16.27” (768.6 x 406.3 x 413.3 )mm |
Videos
EV Innovation
EV Innovation – Installed Performance Loudspeaker Portfolio Webinar
Recommended Amplifiers
For optimal sound system performance, Electro-Voice recommends the following amplifiers for EVF-1152D/43-FG.
Dynacord C‑SeriesLearn More |
Dynacord IPX SeriesLearn More |
Electro-Voice CPS SeriesLearn More |
|
|---|---|---|---|
| Two-Channel | ✔ | ||
| Multi-Channel | ✔ | ✔ | |
| DSP | ✔ | ✔ | |
| Direct Drive | ✔ | ✔ | ✔ |
| OMNEO (Dante, OCA) | ✔ | ||
| Installation | ✔ | ✔ | |
| Live Sound | ✔ |
Downloads
Where to Buy
Install Sound Partners
Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Warranty & After Sales Programs
Compatible Products
Similar Products
