EVID-P6.2

Pendant speaker 6.5"

Summary & Images Specs Where to buy Downloads & Support
  • Full bandwidth overload protection
  • Front baffle wattage tap adjustment
  • Magnetic grille for easy tap adjustment access
  • Indoor and outdoor use
  • UL1480A and CSA C22.2 certified for indoor installations and protected outdoor installations

The Electro-Voice EVID-P6.2 loudspeaker system is a complete two-way pendant loudspeaker. The package consists of a bezel assembly, magnetic grille, rear enclosure, 6.5-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a titanium dome tweeter. The EVID-P6.2 loudspeaker utilizes a 2nd order crossover network with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The EVID-P6.2 loudspeaker utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75W, 7.5W, 15W or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle, easily accessible by removing the magnetic grille.

The perforated grille is finished in semi-gloss black or white powder-coated enamel. The baffle, bezel, and rear-enclosure are constructed from UL 94V-0 rated ABS. The connections on the rear provide access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides passthrough to additional speakers.

The EVID line of speakers has been designed to work together as a complete system in a wide range of different constructions. The pendant and ceiling loudspeakers provide wide dispersion, high efficiency, high-maximum output, ease of installation, and widerange reproduction of music or voice.

Mehr Technische Daten

Rated frequency range60 Hz - 20 kHz
Sensitivity (SPL 1 W/1 m)87 dB
Coverage pattern1115° conical
Power handling (@ 8Ω)75 W (with overload protection)

Rated impedance8 Ω
Recommended High-Pass frequency60 Hz
Input configuration8Ω; 70V/100V
70V/100V power taps1.8 (70V only)/3.7/7.5/15/30 W
LF transducer6.5 in (165 mm) high-compliance driver (weatherized cone)
HF transducer1 in (25 mm) titanium dome
Mounting systemRear mounted suspension points
Acoustic designPorted cabinet, two-way design, internally damped, w/passive crossover
ApprovalsCE, UL 1480A, CSA 22.2
Cabinet constructionUL94V-0 rated enclosure and baffle
Grille constructionPowder-coated steel
ColorsBlack or white
Dimensions (depth x diam.)11.9 in x 12.2 in (301.0 mm x 310.0 mm)
Net weight11.65 lb (5.28 kg)
Shipping weight13.85 lb (6.28 kg)
Included accessoriesGrille removal tool
1 Average 1 kHz to 10 kHz
Included hardware:
Pendant Suspension Cable
MaterialSteel wire rope
Working load limit10 kg (22 lb)
Length4.57 m (15 ft.)
ApprovalsUL2442

Recommended Amplifiers

As part of The Bosch Group, Electro-Voice is dedicated to loudspeakers and microphones and Dynacord is dedicated to amplifiers, DSP and software. The depth of our shared R&D resources are geared towards bringing customers the best of both worlds: state-of-the-art loudspeaker and microphone technology from Electro-Voice, and world-class electronics engineering and software design from Dynacord.

For optimal sound system performance, Electro-Voice recommends the following amplifiers.

Electro-Voice Dynacord Loud&Clear

Learn more about C Series amplifiers by Dynacord
Dynacord C Series

Two-channel power amplifiers for fixed install

Learn more about V Series amplifiers by Dynacord
Dynacord V Series

Multi-channel power amplifier for commercial installations

Learn more about Electro-Voice CPS Series
Electro-Voice CPS Series

CPS contractor precision series amplifiers

Learn more about Electro-Voice PA Series
Electro-Voice PA Series

PA series multi-channel power for fixed install applications

Two-Channel
Multi-Channel
powerTANK
DSP
Direct Drive
OMNEO (Dante, OCA)
Installation

Where to Buy

Install Sound Partners

    * Call for availability

    Downloads

    Garantie & Kundendienst-Programme

    Compatible Products

    sprites_global sprites_ev