CPS 2.4 MK II
Contractor precision series Class‑AB power amplifier
- Up to 2 x 650 W into 2 ohms
- Phoenix-type input and output connections
- Remote power-on/off contact
- Rear-mounted attenuators
- Programmable time for custom power-on delay settings
- Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
- Switchable 50 Hz high-pass filter
- Three-stage front-to-rear fans
- Class-AB design
- Complete protection package
Designed for the contractor, the CPS 2.4 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.4 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
Specifications
| Height | 3.47" (88.1mm) |
| Width | 19" (482.6mm) |
| Depth | 16.59" (421.5mm) |
Specifications |
|
| Weight Net | 27.78lbs (12.6kg) |
| Frequency Response (-3 dB) | 10 Hz - 40 kHz (±1 dB) |
| Cooling | Front-to-Rear, 3-stage fans |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω | 270Watts |
| Audio Network | No |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 200Watts |
| Variable Load Drive (VLD) | No |
| Maximum Bridged Output 8Ω | 900Watts |
| Topology | Class-AB |
| Maximum Bridged Output 4Ω | 1300Watts |
| Impedance | 2/4/8Ω |
| Total Harmonic Distortion | 0.03% |
| Slew Rate | 25V/µs |
| Intermodulation Distortion (SMPTE) | 0.1% |
| DIM 30 | 0.05% |
| Input Impedance (Balanced) | 20kΩ |
| Input Sensitivity | 2.2 dBu (1.0V) |
| Network Control (IRIS-Net) | Optional (RCM-810 card) |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω | 450Watts |
| Amplifier Gain | 32dB |
| Crossover Type | Optional Modules |
| Analog Inputs | 2, electronically balanced, Phoenix-type |
| Maximum Input Voltage | +21 dBu (8.69 Vrms) |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 400Watts |
| Mains Voltage | 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) |
| Electronics Type | Amplifier |
| CAN Bus Interface | Optional (RCM-810 card) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω | 650Watts |
Similar Products
Compatible Products
Videos
Downloads
Where to Buy
Install Sound Partners
Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Warranty & After Sales Programs